Sigelei 30W Variable Power Mod

Sigelei 30W Variable Power Mod

The Sigelei 30W is a variable power device based on the famous SX300 chip. It can be set from 7 to 30 watts in 0.1 watt increments. The Sigelei 30W can handle an atomizer resistance range between 0.5 and 5.0 ohms. The device features a stainless steel design with an easy to read digital display. It also has a removable drip well for clearomizer or tank compatibility and easier cleaning. Settings are controlled via use of a built in gravity sensor system (tilting the device).

• Variable Wattage - 7W to 30W
• Output Voltage - 3.0V - 8.5V
• Atomizer Resistance - 0.5ohm - 3.0ohm
• Adjustable Center Pin
• 510 and Ego threaded
• OLED Screen
• Battery Charge Indicator
• Ohm Meter
• Gravity Sensor System - Adjust settings by tilting the device
• Short Circuit Protection
• Reverse Polarity Protection
• Only use a single IMR 18650 battery. This device is not compatible with protected batteries.
• Low Voltage Warning
• 8-10 Second Cutoff Timer
• Removable Beauty Ring
• 5 Click On/off
• Dimensions: 5-1/2"L x 15/16"D

Quick Start:

1) Install Battery
2) Press the fire button 5 times and let it boot up
3) Press the fire button 5 times to enter the menu

Menu 1 - System On/Off - Tilt the unit to turn it off or on
Menu 2 - Power Setting - Tilt the unit to adjust power in 0.1W increments
Menu 3 - Exit Menu - Tilt the unit to exit the menu.

Write a review