Aspire Nautilus BVC 2mL Mini Pyrex Glass Clearomizer

Aspire Nautilus BVC 2mL Mini Pyrex Glass Clearomizer
Views: 4164 Brand: Aspire
Product Code: ASPRNTLSMNI
Availability: In Stock
$27.99
Qty: Add to Cart

Aspire Nautilus BVC 2mL Mini Pyrex Glass Clearomizer

*Nautilus Mini BVC Tank Clearomizer made of stainless steel and Pyrex glass. This makes the cartomizer more durable and resistant. 


*The Aspire BVC(Bottom Vertical Coil) atomzier technology is designed to last longer while giving users the purest and cleanest taste.

 

Much better Taste

Much more Stable

Much longer Lifetime

Much more Vapor


*The four-port system allows the user to adjust the draw, warmth of vapor, and amount of vapor produced.

 

*510 thread, it can work with 510/eGo theading batteries.

*2ml e-liquid capacity and
1.8ohm BVC coil unit.

 

*The Nautilus Mini design also makes it easy to carry, install, and refill.


 

How to use? 
 

1. Turn upside down the cartomizer, then screw off the bottom hardware.

2. Use the syringer or dropper to fill less than 2ml e-liquid into the space between the glass tank and the center metal tube. Do not overfill it.

3. Carefully screw on the bottom hardware, connect it with the battery and enjoy it.

 

 

How to control the Airflow?

 

4 different airflow hole sizes: Φ0.9mm, Φ1.1mm, Φ1.4mm and Φ1.8mm. You can rotate the airflow control valve to choose the most comfortable one.



How to replace the coil unit/coil head?

Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!

on
4 ( 4 / 5 )
if yu buy the mini be sure to get volt and watts seting or the coil will stick in atom yu will have to boil it out
on
4 ( 4 / 5 )
the aspire mini is a great atomizer but before yu buy it I would suggest you buy a mod that will set your ohms with I tried it with a I taste vv and becausr yu cant get a true ohm read I noticed the coil getting stuck in the bottom I think to much high voltage I would suggest buying I taste mvp yu can set watts and volts and get the right ohm aroung 1.6 to 1.8 at least that's how I see it done properly and no more boiling to get it undone

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: